USER LOGIN
I am a new customer. (Forget Password?)  
USER LOGIN
  (Forget Password?)  
Isokinetic Stack Sampling
Horizontal Condenser with Thermocouple Assembly Set
Horizontal Condenser with Thermocouple Assembly Set
Used to cool sampled flue gas faster and before the gas comes into contact with an adsorbent (e.g. XAD-2). Use in place of the Double "L" Connector. Comes with Thermocouple Assembly Set. -- Information presented here is subjected to Aer Sampling Group's terms and conditions. Doc ID: AERHQWW-us-xgcha-en Last revised (Excluding prices): 03/20/16
Double "L" Connector with Thermocouple Assembly Set
Double "L" Connector with Thermocouple Assembly Set
To connect glass filter holder in MKOR Heater Box to first impinger in Aer Sampling's USEPA Method 5 Standard Configuration. -- Information presented here is subjected to Aer Sampling Group's terms and conditions. Doc ID: AERHQWW-us-xg5k-en Last revised (Excluding prices): 10/14/15
Short Stem Impinger Set
Short Stem Impinger Set
This set contains both the Impinger Insert with the modified Greenburg Smith (Shortened) design tip and the 500mL bottle. -- Information presented here is subjected to Aer Sampling Group's terms and conditions. Doc ID: AERHQWW-us-xgs-en Last revised (Excluding prices):10/14/15
Greenburg-Smith Impinger Set
Greenburg-Smith Impinger Set
This set contains both the Impinger Insert with the Greenburg Smith design tip and the 500mL bottle. -- Information presented here is subjected to Aer Sampling Group's terms and conditions. Doc ID: AERHQWW-us-xgg-en Last revised (Excluding prices): 10/14/15
Plain Impinger Set
Plain Impinger Set
This set contains both the Impinger Insert with the modified Greenburg Smith (Plain) design tip and the 500mL bottle. -- Information presented here is subjected to Aer Sampling Group's terms and conditions. Doc ID: AERHQWW-us-xgp-en Last revised (Excluding prices): 10/14/15
Tubing, Submersible Pump
Tubing, Submersible Pump
Tubing to use Mini Submersible Pump and various condensers.
Mini Submersible Pump
Mini Submersible Pump
To recirculate cooled liquid to the Horizontal Condenser from the ice bath in the Impinger Box.
Ball Joint Clamps #28
Ball Joint Clamps #28
To clamp tight #28 (28mm ID) sized ball joints with #28 sized sockets to minimize leaks.
"U" Type Filter Holder, 2"
"U" Type Filter Holder, 2"
For use if the filter has to go in between impingers in the condensing system.
Impinger connector
Impinger connector
To connect impingers.
Impinger Insert, Greenburg Smith
Impinger Insert, Greenburg Smith
The top part of the Greenburg-Smith Impinger Set which often suffers breakage on the tip.
Impinger Insert, Short
Impinger Insert, Short
The top part of the Impinger Set, Short which often suffers breakage on the tip.
Impinger Insert, Plain
Impinger Insert, Plain
The top part of the Plain Impinger Set which often suffers breakage on the tip.
Impinger Bottle, 500mL
Impinger Bottle, 500mL
Bottle to fit various Impinger Inserts.
Knockout Impinger
Knockout Impinger
A special type of impinger that can accommodate the Resin Trap (XAD-2) vertically to save space.
Resin Trap
Resin Trap
To hold solid adsorbent during stack testing for procedures that require it (i.e. Dioxins & Furans).
Horizontal Condenser
Horizontal Condenser
Used to cool sampled flue gas faster and before the gas comes into contact with an adsorbent (e.g. XAD-2). Use in place of the Double "L" Connector.
Double "L" Connector
Double "L" Connector
To connect glass filter holder in MKOR Heater Box to first impinger in Aer Sampling's USEPA Method 5 Standard Configuration. Thermocouple Assembly NOT included.
Filter Holder, Glass, 3"
Filter Holder, Glass, 3"
To hold filter in the MKOR Heater Box. Nominal size: 3 inch.
Filter Bypass
Filter Bypass
For use in isokinetic stack sampling when a filter is not needed.
Cyclone Bypass
Cyclone Bypass
To connect (glass) Probe Liners directly to the (glass) Filter Holder if a cyclone is not required.